ABRASION RESISTANT STEEL
|ABRASION RESISTANT PLATES|
steel of high quality of the mechanical characteristics higher than
other steels of its category thanks to its special heat treatment.
Product a light martensitic effect during its use. Is appropriate well
for armour plates in chutes, hoppers. Used for blade of cups and cups,
funds of buckets of dumpers, cases of scrapers, etc Possibility of
cutting and forming.
R = 1250 N/mm2 - Hardness = 400 HB - Thicknesses: 3 to 80 mm
R = 1250 N/mm2 - Dureté = 400 HB - Epaisseurs : 3 à 80 mm
of high quality showing the same characteristics as steel Hardox 400
but with a wear resistance higher.
Excellent properties of impact strength and/or cold folding.
Rm = 1400 N/mm² - Re = 1200 N/mm² - Dureté : 450 HB - Epaisseurs : 4 à 80 mm.
|Steel of very
high-quality showing the mechanical characteristics highest of steels
of this category. Extremely resistant to abrasion and the shocks.
Longevity 8 times higher than an ordinary steel and approximately 2
times higher than a steel of a hardness of 300HB.
Same uses as steel Hardox 400 for a hardness from 30 to 50% moreover.
R = 1650 N/mm2 - Dureté = 500 HB - Epaisseurs : 8 à 50 mm
steel with manganese 14%. Of martensitic type, it is hammer-hardened
with work. Extremely abrasion resistant to the shocks very violent one
and. Is appropriate for parts of breakers. Screens of shock in crushing
plants. Parts where a non-magnetic steel is wished. Attention, this
steel does not bore mechanically, to use electrodes STEELARC 310 to
R = 950 N/mm2 - Dureté = 250 à 550 HB - Epaisseurs : 5 à 30 mm
|This steel is
the fruit of research tasks which called upon the most modern
technologies. Nuance ABRANOX 300 presents a balanced chemical
composition. Thanks to its chromium rate of 12%, it can be considered,
in a normal environment, like a stainless steel. It is thus located
between corrodible steels not allies and the stainless steels more
strongly allied, which are as for them more expensive. Because of its
special development, the ABRANOX 300 ensures an appreciable whole of
quality: corrosion resistance, abrasive resistant, impact strength,
weldability, behaviour with high temperature (property mechanics,
oxidation resistance and to corrosion).
Thickness : 3 to 30 mm
|HIGH ELASTIC LIMIT PLATES|
structural steel with high yield stress presenting of excellent
properties of impact strength and/or cold folding. Very good aptitudes
of welding. Used for any construction cauldronful requiring a weight
reduces associated with good mechanical characteristics.|
Used for all equipment of lifting, frame for machines of public works, arm of arrows of mechanical shovels and lifting gear, taking buckets, etc…
Rm = 780/930 N/mm² - Re = 700 N/mm² - A%=14 : Valeurs pour des tôles de 4 à 50 mm² d'épaisseur.
to very high yield stress intended for uses identical to steel Weldox
700 but showing increased mechanical characteristics allowing to lower
in a significant way the weight of constructions cauldronfuls|
Rm = 940/1000 N/mm² - Re = 900 N/mm² - A%=12 : valeurs pour des tôles de 4 à 50 mm d'épaisseur.
|ABRASION RESISTANT BARS|
|STEEL STEELHARD 150
||Self-hardening special steel used for the
snow clearance -
Is also appropriate for blades of attack and reinforcements of cups -
Shieldings in careers and mines - Sections punts and square available in all dimentions.
|STEEL STEELHARD 250
steel of self-hardening type - Extrémement abrasion
resistant, it is appropriate particularly well for the snow clearance -
Dimensions in stock limited -
Minimum quantity to be respected for any delivery.
|STEEL STEELHARD 400
resistant to abrasion and the shocks - Used for the snow clearance, the
realization of blades
of attack of cups, shieldings and reinforcements on machines of T.P - Hardness 400 HB.
|STEEL STEELHARD 500
as Steelhard 400 with still higher constraints -
High-end of steels abrasion resistant - Hardness 500 HB.
|BLADES FOR CHARGERS
OUT OF STEEL STEELHARD 400 AND 500
blades for buckets of steel 400 chargers or 500 HB. They can be
manufactured with 1 or 2 chamfers and holes for screw milled heads or
milled heads square collet.
E.g. Blade for charger Caterpillar 950,966,970,980… or Volvo L120, L150, L180… etc…
|STEEL STEELHARD SMPR
|Shaped special blades of attack for buckets of loaders and mechanical shovels - Hardness 500 HB|