STEELOR

STEELOR
ABRASION RESISTANT STEEL


HARDOX ABRASION RESISTANT PLATES
PLATES DESCRIPTION
400 HB
HARDOX
Data sheet

Having steel of high quality of the mechanical characteristics higher than other steels of its category thanks to its special heat treatment. Product a light martensitic effect during its use. Is appropriate well for armour plates in chutes, hoppers. Used for blade of cups and cups, funds of buckets of dumpers, cases of scrapers, etc Possibility of cutting and forming.
R = 1250 N/mm2 - Hardness = 400 HB - Thicknesses: 3 to 80 mm
R = 1250 N/mm2  - Dureté = 400 HB - Epaisseurs : 3 à 80 mm
450 HB
HARDOX
Data sheet
Steel of high quality showing the same characteristics as steel Hardox 400 but with a wear resistance higher.
Excellent properties of impact strength and/or cold folding.
Rm = 1400 N/mm² - Re = 1200 N/mm² - Dureté : 450 HB - Epaisseurs : 4 à 80 mm.
500 HB






Steel of very high-quality showing the mechanical characteristics highest of steels of this category. Extremely resistant to abrasion and the shocks. Longevity 8 times higher than an ordinary steel and approximately 2 times higher than a steel of a hardness of 300HB.
Same uses as steel Hardox 400 for a hardness from 30 to 50% moreover.
R = 1650 N/mm2 - Dureté = 500 HB - Epaisseurs : 8 à 50 mm
METALBO 14


Data sheet
Combined special steel with manganese 14%. Of martensitic type, it is hammer-hardened with work. Extremely abrasion resistant to the shocks very violent one and. Is appropriate for parts of breakers. Screens of shock in crushing plants. Parts where a non-magnetic steel is wished. Attention, this steel does not bore mechanically, to use electrodes STEELARC 310 to weld it.
R = 950 N/mm2 - Dureté = 250 à 550 HB - Epaisseurs : 5 à 30 mm
ABRANOX 300



Data sheet
This steel is the fruit of research tasks which called upon the most modern technologies. Nuance ABRANOX 300 presents a balanced chemical composition. Thanks to its chromium rate of 12%, it can be considered, in a normal environment, like a stainless steel. It is thus located between corrodible steels not allies and the stainless steels more strongly allied, which are as for them more expensive. Because of its special development, the ABRANOX 300 ensures an appreciable whole of quality: corrosion resistance, abrasive resistant, impact strength, weldability, behaviour with high temperature (property mechanics, oxidation resistance and to corrosion).  
Thickness : 3 to 30 mm

HARDOXHIGH ELASTIC LIMIT PLATES
PLATESDESCRIPTION
WELDOX 700



Data sheet
General structural steel with high yield stress presenting of excellent properties of impact strength and/or cold folding. Very good aptitudes of welding. Used for any construction cauldronful requiring a weight reduces associated with good mechanical characteristics.
Used for all equipment of lifting, frame for machines of public works, arm of arrows of mechanical shovels and lifting gear, taking buckets, etc…
Rm = 780/930 N/mm² - Re = 700 N/mm² - A%=14 : Valeurs pour des tôles de 4 à 50 mm² d'épaisseur.
WELDOX 900

Datasheet
Structural steel to very high yield stress intended for uses identical to steel Weldox 700 but showing increased mechanical characteristics allowing to lower in a significant way the weight of constructions cauldronfuls
Rm = 940/1000 N/mm² - Re = 900 N/mm² - A%=12 : valeurs pour des tôles de 4 à 50 mm d'épaisseur.


STEELOR ABRASION RESISTANT BARS 

BARS DESCRIPTION
STEEL STEELHARD 150
Self-hardening special steel used for the snow clearance -
Is also appropriate for blades of attack and reinforcements of cups -
Shieldings in careers and mines - Sections punts and square available in all dimentions.
STEEL STEELHARD 250
Mangano-silicieux steel of self-hardening type - Extrémement abrasion resistant, it is appropriate particularly well for the snow clearance - Dimensions in stock limited -
Minimum quantity to be respected for any delivery.
STEEL STEELHARD 400
Steel very resistant to abrasion and the shocks - Used for the snow clearance, the realization of blades
of attack of cups, shieldings and reinforcements on machines of T.P - Hardness 400 HB.
STEEL STEELHARD 500
Same employment as Steelhard 400 with still higher constraints -
High-end of steels abrasion resistant - Hardness 500 HB.
BLADES FOR CHARGERS
OUT OF STEEL STEELHARD 400 AND 500
Realization of blades for buckets of steel 400 chargers or 500 HB. They can be manufactured with 1 or 2 chamfers and holes for screw milled heads or milled heads square collet.
E.g. Blade for charger Caterpillar 950,966,970,980… or Volvo L120, L150, L180… etc…
STEEL STEELHARD SMPR
Data sheet
Shaped special blades of attack for buckets of loaders and mechanical shovels - Hardness 500 HB


Back to menu